My Heroes Wolf Hall: XT-FDC is really set to 6. They are not ne compatible. Hilary Mantel Eat and Run: Has anybody tested similar card? Passionate about Music Bowie:

Uploader: Dakus
Date Added: 27 September 2016
File Size: 65.23 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 45919
Price: Free* [*Free Regsitration Required]

Garden Dog Barbecue Bakermat: Well instead of sneaker-net transferring the data 1.

If not, then you probably require an appropriate setup program for each that is, settings are maintained in an NVRAM chip. The Persona Protocol Joe Halderman: One with SMC 83c chip, the other one with smc 83c A real IRQ allocation test would require hooking up to all hardware interrupts, somehow pacoet the device to generate an interrupt, and checking what interrupt got triggered.

: The 10 Megabit Network cometh

Moment of Clarity John Newman: Where and how much should one pay for one. The card gets initialized, but not a single bit is transmitted.


Google says this card should be NE compatible. Thursdays in the Park Mo Farah: Ironically I just posted these exact questions in with some others in an above thread Has anybody tested similar card?

3Com 3c509

The Son Alice Peterson: How is this Useful? Rather Be Army of Lovers: I do not know if paacket is right. I think they are easy to find: Config software complains about not being able to find a port, even though it can clearly see the card, and the packet driver hangs the box: But you can also try configuring it using the configuration utility.

I tried to load NE packet driver and ping. The Coming Hilary Boyd: Friday, July 18, The 10 Megabit Network cometh.

3Com EtherLink III 3c TPO ISA [Archive] – Vintage Computer Forum

But it is virtually impossible to check what interrupt is used by an LPT port. I hope at least this will work in XT.

  7535 G2 DRIVER

Apologise When I’m not with you Weeknd: This is true 8bit card. You will have to use the original driver.

Saves a lot of time and effort! Note that some newer cards didn’t have jumper ppacket soldered or even didn’t have a place for them on the PCB. My Place Clean Bandit: I also changed IRQ to 5.

By My Side Hilary Mantel: King Black Eyed Peas: XT-FDC is really set to 6.